Yes they do. Your machine will come with guidelines on how many hours of service your machine can do before it needs a service. Regular servicing may be part of its warranty conditions. If your machine needs a service you should contact your distributor for more information.
Your choice of strapping machine should be informed by the strapping material you use, the speed at which your product needs to be strapped and how automated your operation needs to be. We have side strapping, table-top strapping and arch strapping machines to choose from.
A strapping tool is a hand-held device that can be battery operated, pneumatic, or completely manual. Strapping machines semi-automate or fully automate the strapping process. An operator places the item to be strapped in position on the machine and it is strapped top and bottom within seconds ready for the next carton or object.
PET strapping has a very high break strength and maintains strap tension during shipment and is a good replacement for steel strap. It is also much safer to use than steel strap which can cause injury to workers with minimal experience.
Your OH&S safety policy should have precautions in place for handling the different types of strapping. Steel strapping should be handled with safety gear such as gloves, safety goggles and strap dispenser.
Strapping Hand Tools - manual tools that include shears, tensioners and crimpers used with seals and buckles. Strapping Machines - automation of strapping applications with an automatic or semi-automatic machine. Strapping Power Tools - are a good option for odd-shaped bundles. They can be battery operated or pneumatic and are hand-held, some of which tension, heat seal, crimp and cut the strap.
If you have a busy production line, strapping machines are a good investment. Depending on your level of output we sell fully or semi-automated strapping machines. Strapping machines can perform all day without a break which can't be expected from staff with handheld tools who may acquire repetitive strain injury. See our strapping machines here.
Steel strap is usually applied with either manual or pneumatic hand tools, either a tensioner and sealer or a combination tool. Polypropylene strap is applied with either hand manual or powered hand tools and sealed with buckles. Polyester strap is applied with hand tools, either manual or powered or with an automatic strapping machine. Woven strapping is sealed with a wire buckle and can be tensioned by hand or by a manual tensioner.
Sometimes you do. A tight wrap with a film wrapping machine can go a long way to stabilising a pallet load. To provide extra security strapping is applied to help heavy loads stay firmly on the pallet. Odd shaped bundles and stretch wrapped items by hand need strapping reinforcement too.
Yes you can. PET (polyester) strapping is considered the steel alternative. It is safer and easier to use and doesn't damage the edges of pallet loads. PET strapping has high shock absorbance and stretch recovery.
Placing cardboard edge protectors on the edges of a pallet load is essential for preventing surface damage from strapping. Edge protectors also protect cartons from strap tension and can be used to line the inside edges of a carton to stop them collapsing. They can also be used to stabilise stretch wrapped freight. See our edge board protectors and cutter product pages here.
Steel strapping is strong and has little to no tension loss. It is good for pallet loads and bundles that weigh more than two tonnes and for containing pallet loads that are likely to be loaded and unloaded multiple times.
Break strength is a term used to determine the amount of force needed to break the strap. Another term for it is break load. It is important to know what force load you will need before determining the type of strap to apply.
PP (polypropylene) is lightweight, cost-effective and made for lighter strapping applications while PET (polyester) has strength and durability closer to that of steel. PET strapping can be used in a wider variety of industries.
The weakest part of the strapping is where it is joined together. Buckle joins are equal to less than half the break strength of the strap. Friction welds done by a power tool produces a joint stronger than 80%. It's important to know the break strength variations of your joins so you can use the right strapping, buckles and joiners for the load you are shipping.
PET strapping is used on pallet loads because it is the stronger of the two. It is considered the steel strapping alternative. PP strapping is used on smaller and lighter loads such as carton sealing because it has the lowest break strength.
Steel strapping is considered the strongest with no stretch so is used on very heavy loads, exceeding two ton. Strapping is made out either steel, polyester (PET) and polypropylene (PP) and the strapping we sell are variants of these materials. Steel strapping has been around for a long time but now there are safer, lighter and more weatherproof strappings that are as strong as steel. PET strapping is a perfect example. If you are moving pallets of bricks or heavy building materials, steel strapping is still the go-to product. If you are sealing cartons and lighter loads then PP strapping is adequate enough. It's best to speak to a professional regard your strapping needs so you get it right the first time.
As we are a Distributor Based Company, all Prices are Recommended Retail Only and final price is at our Distributors' Discretion.
Progressive, Global Source of Wholesale Packaging Solutions
Packline is a reputable supplier of packaging equipment and products that aim to meet the exacting standards of transport and storage
industries across Australia.
Our innovative, high-quality products and services will help you reduce costs, improve productivity, enhance workplace safety and promote care and concern for the environment.
If you need assistance with the best method, tools and materials for an environmentally conscious packing solution, why not contact us today?